LEAK, REPAIR OR SOMETHING NEW? LET’S GET IT SORTED.
Go to Hometown Services

Leaks · Burst pipes · Re-piping

Leaks &
burst pipes

From a burst pipe flooding the laundry to a hidden leak pushing up your water bill. We find where the water’s going, fix it, and tell you if your old pipes are due for replacing.

  • Burst pipe repairs
  • Hidden leak detection
  • Re-piping for old water pipes
Plumber using a torch and meter to trace a leak
Water dripping from a pipe under a bathroom basin
Hand turning off the water at the meter

Find the leakthen fix it

SINCE 2014 TRUSTED PLUMBER HOMETOWN SATISFACTION GUARANTEED HOMETOWN

SIGNS OF A LEAK

Is water going somewhere?

Not every leak is a burst pipe. Most are slow and hidden, and these are the signs to watch for.

01

A higher water bill

Your usage jumps without any change in how you use water.

Water stains on a ceiling
02

Damp walls or ceilings

Stains, bubbling paint or mould near pipes or wet areas.

Plumber using a wrench at a water meter
03

The meter keeps moving

With every tap off, the water meter still ticks over.

Tap dripping into a white basin
04

Dripping taps & fittings

Small drips add up, and often mean a worn washer or cartridge.

Water pooling around outdoor plumbing fittings
05

Water pooling outside

Soggy ground or puddles that don’t dry out, even without rain.

Shower head with a weak stream of water
06

Low water pressure

A sudden drop in pressure can mean water escaping before it reaches the tap.

Burst pipe or water pouring out? Turn off the water at the meter, then call us straight away.

Call 0415 566 264
Rusted, clogged galvanised water pipes
Plumber repairing a pipe joint
Replacing a failed section of pipe

RE-PIPING

When old pipes keep failing.

  • Galvanised steel pipes

    Common in older homes. They rust from the inside, narrowing the pipe and staining the water.

  • Pinhole leaks

    Tiny leaks in old copper pipes tend to appear one after another.

  • Rusty or discoloured water

    Brown water when you first turn a tap on can be corrosion inside the pipes.

  • Falling pressure

    Build-up inside old pipes slowly chokes the flow.

  • Renovating anyway

    If walls and floors are open for a renovation, it’s the easiest time to replace old pipes.

  • New pipe options

    Re-piping in copper or modern plastic pipe, chosen to suit your home.

HOW IT WORKS

Stop it, find it, fix it.

With a leak, speed matters, and so does finding the real source.

  1. Hand turning off the water at the meter
    01

    Stop the water

    For a burst pipe, we talk you through turning off the water at the meter when you call.

  2. Plumber using a torch and meter to trace a leak
    02

    Find the source

    We trace the leak using the water meter and moisture readings, opening up as little as possible.

  3. New pipe section joined with a rubber coupling in a trench
    03

    Repair or replace

    We repair the damaged section, or explain why replacing a run of old pipe makes more sense.

  4. Plumber and homeowner shaking hands in a kitchen
    04

    Test and explain

    We check the repair holds, test for leaks and talk you through what we found.

Hometown Services vans parked outside the depot

LOCAL & LICENSED

A local team you can actually reach.

Hometown Plumbing is part of Hometown Services. When you call, you talk to the people who do the work. If the job needs an electrician too, we can arrange both.

  • Licensed plumber on every job
  • Call-out charge confirmed before we book
  • Work and price explained before we start
  • We clean up when we’re finished
About Hometown Plumbing

BURST PIPE?

What to do right now.

Do

  • Turn off the water at the meter. In most Melbourne homes it’s near the front boundary.
  • If water is near power points or lights, turn off the power at the switchboard, but only if it’s safe to reach.
  • Move valuables and rugs out of the water’s path.
  • Take photos for your insurer.

Don’t

  • Go near electrical fittings in standing water.
  • Leave a dripping tap or running toilet for months. It adds up.
  • Wrap a leak in tape and hope it holds.
  • Ignore a water bill that suddenly jumps.

LEAK QUESTIONS

Good to know.

Burst pipes, hidden leaks and re-piping.

Call 0415 566 264
Where is my water meter?

In most Melbourne homes it’s near the front boundary, often in a small box or beside the path. The valve on it turns off the water to the whole property.

Can you find a leak without tearing out walls?

We use the water meter and moisture readings to narrow it down first, so we only open up where we need to.

Is a leak covered by insurance?

Many policies cover the damage from a sudden burst but not the pipe repair itself or a slow leak. Check with your insurer, and take photos before the clean-up.

What is re-piping?

Replacing old water supply pipes, often rusting galvanised steel or leaking copper, with new pipe. It can be the whole house or just one area.

How much does re-piping cost?

It depends on the size of the home, access and how much pipe is replaced. We look at the job and explain the options and cost before starting.

Will my water bill come down after a leak is fixed?

If a hidden leak was wasting water, your usage should drop on the next bill. Some water corporations may consider an allowance for concealed leaks, so it’s worth asking yours.

WATER WHERE IT SHOULDN’T BE?

Call before it spreads.

Call 0415 566 264. If a pipe has burst, turn off the water at the meter first.

Call 0415 566 264
Call a plumber Send job details